ASPE Proceedings, October 15-20, 1995
Stouffer Renaissance Austin Hotel
Austin, TX

PDF versions of the abstracts from the 1995 Proceedings are not available. Contact ASPE to purchase a copy of the Proceedings. ASPE does not sell individual abstracts from the Proceedings.

Technical Sessions

Session I
Ultraprecision Machining
Tuesday, October 17, 1995
8:30 - 10:00 a.m.
Session Chair: Don A. Lucca (Oklahoma State University)

1. Semiconductor Industry Precision Engineering Challenges Through 2010
   C. Van Peski (SEMATECH)
   Ultraprecision Machining/Oral/No Abstract Available/1995 Annual
2. Development of a Tool Force/Surface Finish Model for Diamond Turning
   C. Arcona, T. A. Dow (North Carolina State University)
   Ultraprecision Machining/Oral/Abstract/1995 Annual
3. Fabrication of Large Radii Toroidal Surfaces by Single Point Diamond Turning
   J. P. Cunningham, T. A. Marlar, A. C. Miller (Oak Ridge National Laboratory), and R. L. Paterson (LEXMARK International, Inc.)
   Ultraprecision Machining/Oral/Abstract/1995 Annual
4. Molecular Dynamics Modeling of Thermal Conduction in Microcutting of Metals
   S. Shimada, N. Ikawa, R. Inoue, J. Uchikoshi (Osaka University)
   Ultraprecision Machining/Oral/Abstract/1995 Annual

Session II
Precision Grinding I
Tuesday, October 17, 1995
1:30 - 3:00 p.m.
Session Chair: Thomas G. Bifano (Boston University)

1. Investigation of Acoustic Emission for Use as a Wheel-to-workpiece Proximity Sensor in Fixed-abrasive Grinding
   J. S. Taylor, M. A. Piscotty, K. L. Blaedel, L. F. Weaver (Lawrence Livermore National Laboratory), and D. A. Dornfeld (University of California at Berkeley)
   Precision Grinding I/Oral/Abstract/1995 Annual
2. The Dislocation Structure in Alumina Associated with Ultraprecision Grinding
   I. Zarudi, L. C. Zhang (The University of Sydney)
   Precision Grinding I/Oral/Abstract/1995 Annual
3. Proposal of High Productivity in Ductile Mode Grinding of Brittle Materials
   A. Kanai, M. Miyashita, M. Sato (Ashikaga Institute of Technology), and M. Daito (Nissin Machine Works Ltd.)
   Precision Grinding I/Oral/Abstract/1995 Annual
4. Shear-mode Grinding Force Criteria in Grinding with Serrated Wheels
   H. Hashimoto, K. Imai (Kanagawa Institute of Technology)
   Precision Grinding I/Oral/Abstract/1995 Annual
5. High Efficiency Mirror Finishing of Ceramics with Diamond Wheel
   X-J. Wang, K. Syoji, T. Kuriyagawa (Tohoku University)
   Precision Grinding I/Oral/Abstract/1995 Annual

Session III
Precision Grinding II
Tuesday, October 17, 1995
3:30 - 5:00 p.m.
Session Chair: W. Keith Kahl (Oak Ridge National Laboratory)

1. Glass Polishing for Optical Communication Devices--Characterization of Slightly Damaged Surface
   S. Matsui, H. Ohira, K. Matsunaga, Y. Kikuya (NTT Interdisciplinary Research Labs.)
   Precision Grinding II/Oral/Abstract/1995 Annual
2. Grinding of Micro Aspherical Surface
   H. Suzuki, S. Kodera, S. Hara (Mitsubishi Electric Corporation), and K. Tanaka, H. Takeda (Toshiba Machine Co., Ltd.)
   Precision Grinding II/Oral/Abstract/1995 Annual
3. Time Dependent Voltage & Current Behavior for Electrolytic In-process Dressing of Bound Abrasive Wheels (ELID)
   K. D. Grobsky, D. E. Johnson, F. Demarest (Zygo Corporation)
   Precision Grinding II/Oral/Abstract/1995 Annual
4. Electrolytic Dressing of Bronze-bonded Diamond Grinding Wheels
   H. Caggiano, T. G. Bifano (Boston University)
   Precision Grinding II/Oral/Abstract/1995 Annual
5. In-process Dressing of Grinding Wheels for Brittle Materials
   K. W. Sharp, R. O.Scattergood (North Carolina State University)
   Precision Grinding II/Oral/Abstract/1995 Annual

Session IV
Micro-positioning
Wednesday, October 18, 1995
8:30 - 10:00 a.m.
Session Chair: Musa K. Jouaneh (University of Rhode Island)

1. Spring Dominated Regime Design of a High Load Capacity, Electromagnetically Driven X-Y-q Stage
   K-S. Chen, D. L. Trumper, M. Williams (Massachusetts Institute of Technology), A. Monterio (University of Warwick), and S. T. Smith (University of North Carolina at Charlotte)
   Micro-positioning/Oral/Abstract/1995 Annual
2. A Versatile XY Stage with a Flexural Six-degree-of-freedom Fine Positioner
   J. A. Gargas, R. K. Dorval, D. Mansur, H. D. Tran, D. Carlson, M. Hercher (OPTRA, Inc.)
   Micro-positioning/Oral/Abstract/1995 Annual
3. Long Range, Direct Drive XY-(F=0)-Stage with Sub-micrometer Resolution
   G. M. Bonnema, F. Auer, J. de Lange, H. F. van Beek (Delft University of Technology)
   Micro-positioning/Oral/Abstract/1995 Annual
4. A New Hybrid Concept for a Long Stroke Fast-tool-servo System
   M. Weck, H. Özmeral, K. Mehlkopp, T. Terwei (Fraunhofer-Institut für Produktionstechnologie, IPT)
   Micro-positioning/Oral/Abstract/1995 Annual
5. A New Inchworm® Motor for Industrial Nanopositioning Applications
   D. Henderson (Burleigh Instruments, Inc.)
   Micro-positioning/Oral/Abstract/1995 Annual

Session V
Precision Transducers & Measurement
Wednesday, October 18, 1995
3:30 - 5:00 p.m.
Session Chair: Anthony E. Gee (Cranfield University)

1. A New Probe for Friction Measurements at Very Small Scales
   L. A. J. Davis, D. K. Bowen, D. G. Chetwynd (University of Warwick)
   Precision Transducers and Measurement/Oral/Abstract/1995 Annual
2. A Two-degree-of-freedom Capacitive Position Sensor With Improved Measurement Algorithms
   M. H. W. Bonse, J. W. Spronck (Delft University of Technology)
   Precision Transducers and Measurement/Oral/Abstract/1995 Annual
3. Extending the Accuracy and Precision of In-situ Ultrasonic Thickness Measurements *
   D. E. Dunn, J. R. Cerino (Hughes Danbury Optical Systems)
   Precision Transducers and Measurement/Oral/Abstract/1995 Annual
4. Evaluation of High Precision Triangulation Sensors for Coordinate Measurement
   M. V. Ananda, J. A. Jalkio, L. Konicek (CyberOptics Corporation)
   Precision Transducers and Measurement/Oral/Abstract/1995 Annual
5. Measurement of Friction at Light Loads in Polypyrrole Thin Film Bearings
   X. Liu, D. G. Chetwynd, J. W. Gardner (University of Warwick), S. T. Smith (University of North Carolina at Charlotte), and C. Beriet, P. N. Bartlett (University of Southampton)
   Precision Transducers and Measurement/Oral/Abstract/1995 Annual

Session VI
Micro Devices
Thursday, October 19, 1995
8:30 - 10:00 a.m.
Session Chair: David H. Youden (Rank Pneumo, Inc.)

1. An Architecture for Agile Assembly
   R. L. Hollis (Carnegie Mellon University)
   Micro Devices/Oral/Abstract/1995 Annual
2. Breakthroughs in 3-D Ultrafine Shape Fabrication by Dynamic FAB Etching
   M. Nakao, S. Tanaka, Y. Hatamura (The University of Tokyo), and M. Hatakeyama, K. Ichiki (Ebara Research Co., Ltd.)
   Micro Devices/Oral/Abstract/1995 Annual
3. Design and Fabrication of a Two Dimensional Valveless Micropump
   W. K. Kahl , C. M. Egert, K. W. Hylton (Oak Ridge National Laboratory)
   Micro Devices/Oral/Abstract/1995 Annual
4. Micro-pattern Control by Miniature Robots in Vapor Deposition Process
   H. Aoyama, K. Mizutani, F. Iwata, A. Sasaki (Shizuoka University)
   Micro Devices/Oral/Abstract/1995 Annual

Session VII
Surface Profilometry
Thursday, October 19, 1995
10:30 a.m. - 12:00 p.m.
Session Chair: Jay Raja (University of North Carolina at Charlotte)

1. New Algorithms for the Evaluation of Discrete Point Measurement Data and for Sample Point Selection on Surfaces with Systematic Form Deviations
   K. D. Summerhays, R. P. Henke, R. M. Cassou (University of San Francisco), J. M. Baldwin (Sandia National Laboratories), and C. W. Brown (Allied Signal Aerospace)
   Surface Profilometry/Oral/Abstract/1995 Annual
2. Interferometric Calibration of a Capacitance Gauge for AFM Step Height Metrology *
   V. W. Tsai, E. D. Williams (University of Maryland at College Park), and J. Schneir, T. McWaid, R. Dixson (National Institute of Standards and Technology)
   Surface Profilometry/Oral/Abstract/1995 Annual
3. Recent Advances in Stylus Based 3-D Surface Measurement and Characterization
   P. J. Scott (The University of Birmingham), and E. Morrison (Rank Taylor Hobson Ltd.)
   Surface Profilometry/Oral/Abstract/1995 Annual
4. Efficient Characterization of Surface Topography in Cylinder Bores
   P. Pawlus (Rzeszow University of Technology), and D. G. Chetwynd (University of Warwick)
   Surface Profilometry/Oral/Abstract/1995 Annual
5. Application of Confocal Scanning Optical Microscope to Three-dimensional Surface and Form Error Characterization
   G. Udupa, M. Singaperumal, R. S. Sirohi, M. P. Kothiyal (Indian Institute of Technology)
   Surface Profilometry/Oral/Abstract/1995 Annual

Session VIII
Machine Tool Metrology
Thursday, October 19, 19951:30 - 3:00 p.m.
Session Chair: Robert G. Wilhelm (University of North Carolina at Charlotte)

1. Modeling and Prediction of Thermally Induced Error Maps in Machine Tools Using a Laser Ball Bar and a Neural Network
   N. Srinivasa (University of Illinois at Urbana-Champaign), and J. C. Ziegert (University of Florida)
   Machine Tool Metrology/Oral/Abstract/1995 Annual
2. Rapid Mapping of Volumetric ErrorsD. Krulewich, L. Hale, D. Yordy (Lawrence Livermore National Laboratory)
   Machine Tool Metrology/Oral/Abstract/1995 Annual
3. Numerical and Experimental Study of Ball-bar Dynamics During Probing
   Y-Z. Dai (Brown & Sharpe Manufacturing Company)
   Machine Tool Metrology/Oral/Abstract/1995 Annual
4. Automatic Measurement of Axial and Tilt Error Motions of an Aerostatic Spindle Using Optical InterferometryA. Idowu, A. E. Gee (Cranfield University)
   Machine Tool Metrology/Oral/Abstract/1995 Annual
5. On-machine Acceptance of Machined Components
   A. Hazelton (Sandia National Laboratories)
   Machine Tool Metrology/Oral/Abstract/1995 Annual

Session IX
Error CompensationThursday, October 19, 1995
3:30 - 5:00 p.m.
Session Chair: Debra Krulewich (Lawrence Livermore National Laboratory)

1. Correlation Models for Improved Machine Tool Accuracy
   N. Srinivasan, F. Farabaugh, R. G. Wilhelm, R. J. Hocken (University of North Carolina at Charlotte)
   Error Compensation/Oral/Abstract/1995 Annual Error Compensation for CMM Touch Trigger Probes
   W. T. Estler, S. D. Phillips, B. Borchardt, T. Hopp, C. Witzgall, M. Levenson, K. Eberhardt, M. McClain (National Institute of Standards and Technology)
   Error Compensation/Oral/Abstract/1995 Annual
2. Accuracy Enhancement in Profile Grinding Through Utilization of Post Process Inspection with Feedback
   T. M. Dalrymple, J. C. Ziegert (University of Florida)Error Compensation/Oral/Abstract/1995 Annual
3. Active Thermal Deformation Compensation Based on Internal Monitoring and Neural Network with the Genetic Algorithm Method
   M. Mitsuishi, T. Okumura, N. Sugita, T. Nagao, Y. Hatamura (The University of Tokyo)
   Error Compensation/Oral/Abstract/1995 Annual
4. Compensation of Errors Detected by Process-intermittent Gauging
   H. T. Bandy, D. E. Gilsinn (National Institute of Standards and Technology)Error Compensation/Oral/Abstract/1995 Annual

Poster Session I
Metrology & Controls
Tuesday, October 17, 1995
10:30 a.m. - 12:00 p.m.

METROLOGY
SPM

1. Vibration Signature Analysis of AFM Images
   G. A. Joshi, J. Fu (National Institute of Standards and Technology), and S. M. Pandit (Michigan Technological University)
   Metrology/SPM/Poster/Abstract/1995 Annual

Machine Tools

1. A Waylube Performance Comparison Using a Telescopic Ball Bar
   T. Ouvreloeil, P. McIntosh (CarboMedics Inc.)
   Metrology/Machine Tools/Poster/Abstract/1995 Annual
2. A 5 Degree-of-freedom Capacitive Position Sensor for Straightness Measurements
   J. W. Spronck, M. H. W. Bonse, G. Nijsse (Delft University of Technology)
   Metrology/Machine Tools/Poster/Abstract/1995 Annual
3. Autonomous Calibration of a Hexapod Machine Tool
   H. Zhuang (Florida Atlantic University)
   Metrology/Machine Tools/Poster/Abstract/1995 Annual Using Capacitance Probes to Measure the Limit of Machine Contouring Performance
   D. Martin (Lion Precision)
   Metrology/Machine Tools/Poster/Abstract/1995 Annual
4. A Study on Straight Movement Error Detection in the Method of Laser Datum
   Wan D-A., Gao Y., Li Y., Ma S. (Tong-Ji University)
   Metrology/Machine Tools/Poster/Abstract/1995 Annual

Sensors

1. Zone-plate Interferometer to Measure the Positioning Error of a Cutting Tool
   T. Nomura, K. Kamiya, H. Miyashiro (Toyama Prefectural University), and H. Tashiro, K. Yoshikawa (Toyama University)
   Metrology/Sensors/Poster/Abstract/1995 Annual
2. Study of New Type Interferometer of Double Interferogram
   H. Zhu, B. Lu, S. Ye (Tianjin University)
   Metrology/Sensors/Poster/Abstract/1995 Annual Computer Vision System for 2-D Edge Detection Using Hardware Demodulation
   Jing F., Song J., Li D., Ren Y. (Tianjin University)
   Metrology/Sensors/Poster/Abstract/1995 Annual
3. A New Fringe-field Capacitive Sensor
   Tian G., Yan B. (Sichuan Union University)
   Metrology/Sensors/Poster/Abstract/1995 Annual
4. Fibre Optic Sensor on Robot End Effector for Flexible AssemblyK. L. Yung, W. S. Lau, C. K. Choi, Y. Y. Shan (The Hong Kong Polytechnic University)
   Metrology/Sensors/Poster/Abstract/1995 Annual
5. Design of a System for Measuring the Power Drawn in a Stirred Tank with Multiple Impellers
   G. Ascanio, B. Castro, A. Martínez, S. Chatwin, E. Galindo (Universidad Nacional Autónoma de México)
   Metrology/Sensors/Poster/Abstract/1995 Annual

Topography

1. Evalation of the Dimensions of Sinusoidal Gratings
   T. Ahbe, K. Hasche, K. Thiele (Physikalisch-Technische Bundesanstalt)
   Metrology/Topography/Poster/Abstract/1995 Annual

CMM

1. Tracking and Triangulation Approaches to CMM Performance Verification
   P. A. C. Miguel (CT-UNIMEP, Sta. Bárbara d’Oeste), and T. G. King (The University of Birmingham)Metrology/CMM/Poster/Abstract/1995 Annual
2. A Precision Inspection System for Aircraft Parts Having Thin Features in CAD/CAI Integrated Environment
   H. J. Pahk, W. J. Ahn (Seoul National University)
   Metrology/CMM/Poster/Abstract/1995 Annual
3. A New Method of Evaluating the Form Error of Torus
   S. Liu, Y. Li, Z. Zou, J. Li (Tianjin University)Metrology/CMM/Poster/Abstract/1995 Annual
4. Evaluation of the Position Error of Two-cylinder-workpiece Applying Maximum Material Principle
   S. Liu, J. Li, Z. Zou, Y. Li (Tianjin University)
   Metrology/CMM/Poster/Abstract/1995 Annual
5. A Method to Enhance the Quality and Reliability of Inspection Data for Precision Manufacturing Applications
   G. L. Lee, J. Mou (Arizona State University)
   Metrology/CMM/oster/Abstract/1995 Annual
6. Helical Screw Rotor Tolerancing and Coordinate Metrology for Grinding Process Optimization
   I. H. Sutedjo, H. Fannar, J. L. Bowman (Ingersoll-Rand Company), and R. G. Wilhelm (University of North Carolina at Charlotte)
   Metrology/CMM/Poster/Abstract/1995 Annual
7. Design and Analysis of a Two-dimensional Aluminum Standard to Calibrate CMMs
   S. Padilla, D. Palomino, G. Ascanio, G. Ruiz, J. Sánchez (Universidad Nacional Autónoma deMéxico)
   Metrology/CMM/Poster/Abstract/1995 Annual
8. Generalization and Verification of Vectorial Tolerances
   H-T. Yau (National Chung Cheng University)
   Metrology/CMM/Poster/Abstract/1995 Annual

Surface Finish

1. Optical Probe for Surface Profiling of Aspherical Mirrors
   P. S. Huang, X. Xu (SUNY Stony Brook)
   Metrology/Surface Finish/Poster/Abstract/1995 Annual
2. Noncontact Surface Roughness Measuring System Based on Computer Vision
   You Z., Chen J., Pu X (Tsinghua University)
   Metrology/Surface Finish/Poster/Abstract/1995 Annual
3. A Comparative Study of Surface Texture Measurement Using White Light Scanning Interferometry and Contact Stylus Techniques
   Metrology/Surface Finish/Poster/Abstract/1995 Annual
4. A Study of the Surface Microtopography of Aluminum Alloys in Single Point Diamond Turning
   B. D. Boudreau, J. Raja, H. Sannareddy (University of North Carolina at Charlotte), and P. J. Caber (WYKO Corporation)
   Metrology/Surface Finish/Poster/Abstract/1995 Annual

CONTROLS
Manufacturing

1. Feedback Control of a Low-profile Micro-positioning Stage
   P. Ge, M. Jouaneh (University of Rhode Island)
   Controls/Manufacturing/Poster/Abstract/1995 Annual

Error Compensation

1. Error Compensation of Multi-axis Manufacturing Center
   Y. Wang, K. S. Moon, J. W. Sutherland (Michigan Technological University), and G. Zhang, Y. Zang, X. Chu, J. Du (Tianjin University)
   Controls/Error Compensation/Poster/Abstract/1995 Annual
2. A Method to Integrate Neural Networks and Kinematics-based Models for Machine Error Characterization
   H. M. Lee, J. Mou (Arizona State University)
   Controls/Error Compensation/Poster/Abstract/1995 Annual
3. Digital Compensation of Sensors with Frequency Output
   Tian G. (Sichuan Union University)
   Controls/Error Compensation/Poster/Abstract/1995 Annual
4. Computer Modeling of Heterodyne Interferometer Errors
   L. P. Howard, J. A. Stone (National Institute of Standards and Technology)
   Controls/Error Compensation/Poster/Abstract/1995 Annual

Machine Tools

1. Dynamic Tool Path Determination System Based on the Experimentally Obtained Stability Lobe Diagram Using Multi-axis Force
   M. Mitsuishi, T. Ohta, H. Okabe, T. Nagao (The University of Tokyo)
   Controls/Machine Tools/Poster/Abstract/1995 Annual
2. Accuracy Improvement of Machine Tool by Workpiece-referred Control--4th Report: Sensor Position for Plain Turning
   T. Yazawa, Y. Uda, T. Kohno (Tokyo Metropolitan Institute of Technology)
   Controls/Machine Tools/Poster/Abstract/1995 Annual
3. Dynamic Hybrid Position/Force Control of Deburring Robot Manipulators
   R. Venkata Ramana, T. Nagarajan, Y. G. Srinivasa (Indian Institute of Technology)
   Controls/Machine Tools/Poster/Abstract/1995 Annual

Poster Session II
Processing & Design
Wednesday, October 18, 1995
10:30 a.m. - 12:00 p.m.

PROCESSING
Turning

1. Diagnostic of Diamond Turning through FFT Analysis of Finished Surfaces
   A. J. V. Porto, J. G. Duduch, L. C. R. Carpinetti, R. G. Jasinevicious, R. Tsunaki (Universidade de São Paulo), and A. E. Gee (Cranfield University)
   Processing/Turning/Poster/Abstract/1995 Annual
2. Temperature Modeling for Orthogonal Diamond Machining
   B. C. Rao, R. X. Gao, C. R. Friedrich (Louisiana Tech University)
   Processing/Turning/Poster/Abstract/1995 Annual
3. Relationship Between Catastrophic Fracture and Electric Resistance of Cutting Tools--A Trial for Catastrophic Tool Fracture Prediction
   K. Uehara (Toyo University), and N. Obitsu (Kiriu Machine Mfg. Co., Ltd.)
   Processing/Turning/Poster/Abstract/1995 Annual
4. Inverse Technique for Analyzing the Orthogonal Cutting Process
   W. Xu, J. Genin, Q. Dong (New Mexico State University)
   Processing/Turning/Poster/Abstract/1995 Annual
5. Chip Segmentation in Machining AISI 52100 Steel
   M. A. Davies, C. J. Evans, K. K. Harper (National Institute of Standards and Technology)
   Processing/Turning/Poster/Abstract/1995 Annual

Grinding

1. Grinding Mechanisms of Resinoid Bonded Diamond Wheels with Ultrafine Grains
   J. Tang, D. Dornfeld (University of California at Berkeley), and K. Syoji, T. Kuriyagawa (Tohoku University)
   Processing/Grinding/Poster/Abstract/1995 Annual
2. Part Speed Effects on Surface Roughness in Precision Grinding
   G. E. Storz II, T. A. Dow (North Carolina State University)
   Processing/Grinding/Poster/Abstract/1995 Annual
3. Grinding Temperature in Ceramic Workpieces
   S-X. Liang, O. F. Devereux, Y.Y. Li (University of Connecticut)
   Processing/Grinding/Poster/Abstract/1995 Annual
4. Implementation of a Real-time Grinding Process Estimator
   H. E. Jenkins, T. R. Kurfess (Georgia Institute of Technology)
   Processing/Grinding/Poster/Abstract/1995 Annual
5. In Process Monitoring and Control of Internal Grinding in High Strength Steel
   Ma P., Wang M. (Nanjing University of Aeronautics & Astronautics)
   Processing/Grinding/Poster/Abstract/1995 Annual
6. Framework for Assessing Key Variable Dependencies in Loose-abrasive Grinding and Polishing
   J. S. Taylor, D. M. Aikens, N. J. Brown (Lawrence Livermore National Laboratory)
   Processing/Grinding/Poster/Abstract/1995 Annual

Polishing

1. N/C Polishing Program: Continued Force Wear and Part Correction Experiments
   P. R. Hannah, R. D. Day, D. J. Hatch (Los Alamos National Laboratory), and. E. R. McClure (Moore Tool Co.)
   Processing/Polishing/Poster/Abstract/1995 Annual
2. A Computer-controlled Polishing Machine for Strongly Aspheric Optics
   Q. Kong, R. Zimmermann, M. High (Applied Physics Specialties Ltd.)
   Processing/Polishing/Poster/Abstract/1995 Annual

Modeling

1. Determinism in Dice Throwing and the Transition to Chaos
   L. Hale (Lawrence Livermore National Laboratory)
   Processing/Modeling/Poster/Abstract/1995 Annual
2. Analytical Determination of the Temperature Distribution Within a Hollow Hemisphere During a Machining Process
   J. C. Shipley (Los Alamos National Laboratory), and. G. P. Mulholland (New Mexico State University)
   Processing/Modeling/Poster/Abstract/1995 Annual

Other Novel Processing

1. Thrust Force and Wall Roughness in Microdrilling
   C. Friedrich, Y. She, R. Muthu, C. Dave (Louisiana Tech University)
   Processing/Other Novel Processing/Poster/Abstract/1995 Annual
2. Mechanical Micromilling of PMMA
   C. Friedrich, B. Kikkeri, T. Nagarajan (Louisiana Tech University)
   Processing/Other Novel Processing/Poster/Abstract/1995 Annual
3. A Preliminary Study on the Effect of Tool Flank Wear on Surface Finish in End Milling
   S. N. Melkote (Georgia Institute of Technology)
   Processing/Other Novel Processing/Poster/Abstract/1995 Annual
4. Experimental Investigations Into Electro-chemical Spark Machining of Kevlar Epoxy Composites
   V. K. Jain, S. K. Choudhury, V. Nesarikar (Indian Institute of Technology)
   Processing/Other Novel Processing/Poster/Abstract/1995 Annual
5. Cold Form Tapping of Internal Threads for Landing Craft in High Strength Steel
   Ma P., Wang M. (Nanjing University of Aeronautics & Astronautics)
   Processing/Other Novel Processing/Poster/Abstract/1995 Annual

DESIGN
Precision Machining

1. Design of a Long Range Fast Tool Servo System Using Magnetic Servo Levitation
   B. A. Stancil, H. M. Gutierrez, P. I. Ro (North Carolina State University)
   Design/Precision Machining/Poster/Abstract/1995 Annual
2. A High Precision Five-degree-of-freedom Micropositioner Based on Electromagnetic Driving Principle
   W. Wang, T. He (Louisiana Tech University), and I. Busch-Vishniac (The University of Texas at Austin)
   Design/Precision Machining/Poster/Abstract/1995 Annual
3. Influence of Form Deviations on the Dynamic Performance of Microhydraulic Actuators
   K. Sadashivappa, M. Singaperumal, K. Narayanasamy (Indian Institute of Technology)
   Design/Precision Machining/Poster/Abstract/1995 Annual
4. Development of a Parallel Architecture Five-axis Coordinate Measuring Machine
   B. Jokiel, Jr., J. C. Ziegert (University of Florida)
   Design/Precision Machining/Poster/Abstract/1995 Annual
5. Micro-impulse Generation Digging Tool for Micro Surgery
   M. Nakao, Y. Hatamura, R. Asai, T. Yano (The University of Tokyo)
   Design/Precision Machining/Poster/Abstract/1995 Annual
6. Design of Spur and Helical Gears *
   J. Mandak (Language Studies Institute MTA)
   Design/Precision Machining/Poster/Abstract/1995 Annual
7. A New Method for Improving Dynamic Stiffness of Advanced Ceramic Structures
   P. Scagnetti (Wilbanks International), E. Marsh (The Pennsylvania State University), and A. H. Slocum, S. Nayfeh (Massachusetts Institute of Technology)
   Design/Precision Machining/Poster/Abstract/1995 Annual
8. An Experimental Study on the High-precision Linear Motion Table with Magnetic Bearing Suspension
   Y. Joung, S-C. Jung, D-C. Han (Seoul National University), and I-B. Chang (Kangwon National University)
   Design/Precision Machining/Poster/Abstract/1995 Annual
9. Analytical and Experimental Identification of Nonlinearities in a Single Nut, Preloaded, Precision Ball Screw
   J. F. Cuttino (The University of Alabama), and T. A. Dow (North Carolina State University)
   Design/Precision Machining/Poster/Abstract/1995 Annual

Bearings

1. Analytical Expression of Damping Ratio of Air-lubricated Slideways for Ultraprecision Machine Tools
   S. Kato (Nippon Institute of Technology)
   Design/Bearings/Poster/Abstract/1995 Annual
2. Modeling of Self-compensated Bearings for High Stiffness
   B. Zhang, Y. Sun (University of Connecticut)
   Design/Bearings/Poster/Abstract/1995 Annual

Machine Tools

1. Design of Dynamically Stiff Precision Machines for Low Damage Grinding of Brittle Materials. Tetragorm™ a New Approach
   P. Morantz, P. Shore (Cranfield Precision Engineering, Ltd.)
   Design/Machine Tools/Poster/Abstract/1995 Annual
2. A Compliance Model of the Roller Contact Interface for a Friction Drive Used on Ultraprecision Machine Tools *
   B. N. Damazo (National Institute of Standards and Technology), A. E. Gee (Cranfield University), and A. H. Slocum (Massachusetts Institute of Technology)
   Design/Machine Tools/Poster/Abstract/1995 Annual
3. Application of Linear Scale With 1 nm Resolution to Ultraprecision Machine Tools
   A. Kanai, M. Miyashita, T. Kitahara (Ashikaga Institute of Technology)
   Design/Machine Tools/Poster/Abstract/1995 Annual