ASPE Proceedings, November 7-12, 1993
The Westin Hotel
Seattle, Washington

PDF versions of the abstracts from the 1993 Proceedings are not available. Contact ASPE to purchase a copy of the Proceedings. ASPE does not sell individual abstracts from the Proceedings.

Technical Sessions

Session I
Grinding
Tuesday, November 9, 1993, 8:30 - 10:00 am
Session Chair: Masakazu Miyashita (Ashikaga Institute of Technology)

1. Influence of Wet Grinding Temperature on Surface Morphology of Fine Ceramics
   A. Hosokawa, H. Yasui (Kumamoto University), and K. Higuchi (Seiko Epson Corp.)
   Grinding/Oral/Abstract/1993 Annual
2. Ultraprecision Grinding of Optical Glasses for Obtaining Optical Surfaces
   Y. Namba, M. Abe (Chubu University)
   Grinding/Oral/Abstract/1993 Annual
3. Grinding With Directionally Aligned SiC Whisker Grinding Wheel
   K. Yamaguchi (Nagoya University), and I. Horaguchi (Toyota College of Technology)
   Grinding/Oral/Abstract/1993 Annual
4. Surface Characterization of Mirror-polished and Ductile-mode-ground Si Wafers
   N. Yasunaga (Tokai University), and Y. Samitsu, K. Abe, K. Hatta (Nippon Steel Co.)
   Grinding/Oral/Abstract/1993 Annual

Session II
Metrology I
Tuesday, November 9, 1993, 1:30 - 3:10 pm
Session Chair: H. Frank van Beek (Delft University of Technology)

1. A Full-aperture Optical Test for Large Convex Aspheric Mirrors
   J. H. Burge, D. S. Anderson (University of Arizona)
   Metrology I/Oral/Abstract/1993 Annual
2. Near-infrared Phase-modulation Interferometer for Surface Flatness Measurement
   P. de Groot, L. Deck (Zygo Corporation)
   Metrology I/Oral/Abstract/1993 Annual
3. Advanced Applications of Scanning Probe Microscopy
   D. Grigg (Digital Instruments Inc.)
   Metrology I/Oral/No Abstract Available/1993 Annual
4. Tunneling Current Characterization: An Application of an X-Ray Interferometric Calibrated Flexure Stage
   J. A. Miller (UNC-Charlotte), and S. T. Smith (University of Warwick)
   Metrology I/Oral/Abstract/1993 Annual
5. 3.39mm Infrared Multiwavelength He-Ne Laser Interferometer for Absolute Distance Measurement
   Y. Zheng, W. Ren, J. Liang (Tsinghua University)
   Metrology I/Oral/Abstract/1993 Annual

Session III
Machine Design I
Tuesday, November 9, 1993, 3:30 - 5:10 pm
Session Chair: John Ziegert (University of Florida)

1. Design Strategies for Ultraprecision, High Stiffness Feed System of Slide on Plain Bearing Guideways
   M. Daito (Nissin Machine Works, Ltd.), A. Kanai, M. Miyashita (Ashikaga Institute of Technology), and J. Yoshioka (NUTR K.K.)
   Machine Design I/Oral/Abstract/1993 Annual
2. Evaluation of a Tapered Roller Bearing Spindle for High-precision Hard Turning Applications
   M. A. Donmez, K. Harper, L. Greenspan (National Institute of Standards and Technology), and Y. Matsumoto, L. Keller (The Timken Co.)
   Machine Design I/Oral/Abstract/1993 Annual
3. Proposal of Multi-point Ultraprecision Slide Feed Mechanism by Making Use of Force-operated Actuator
   A. Kanai, M. Miyashita, S. Uchida (Ashikaga Institute of Technology)
   Machine Design I/Oral/Abstract/1993 Annual
4. Design Optimization of Herring Bone Air Bearings for Polygon Mirror Laser Scanners
   G. Lin, G. Huang, R. O. Warrington (Louisiana Tech University)
   Machine Design I/Oral/Abstract/1993 Annual
5. An Active Inherent Restrictor for an Infinite Stiffness Aerostatic Bearing
   H. Mizumoto, S. Arii (Tottori University), and Y. Kami (Nachi-Fujikoshi Co., Ltd.)
   Machine Design I/Oral/Abstract/1993 Annual

Session IV
Metrology II
Wednesday, November 10, 1993, 8:00 - 10:00 am
Session Chair: Robert Hocken (UNC-Charlotte)

1. Residual Error Compensation of a Vision-based Coordinate Measuring Machine
   M. Ananda (Pacific Precision Laboratories, Inc.), J. Raja (UNC-Charlotte), and T. D. Doiron, J. Zimmerman (National Institute of Standards and Technology)
   Metrology II/Oral/Abstract/1993 Annual
2. Sampling Methods and Substitute Geometry Algorithms for Measuring Cylinders in Coordinate Measuring
   Machines
   U. Babu, J. Raja, R. J. Hocken (UNC-Charlotte)
   Metrology II/Oral/Abstract/1993 Annual
3. Development of Noncontact-type Coordinate Measuring Machine -- Measurement of Accuracy of Screw Thread Profile
   K. Maruyama, H. Tsuji, H. Kakimoto, M. Kurumisawa (Tokyo Institute of Technology)
   Metrology II/Oral/Abstract/1993 Annual
4. SEM Linewidth Metrology for X-Ray Lithography Masks
   M. T. Postek, J. R. Lowney, A. E. Vladar, W. J. Keery, E. Marx, R. D. Larrabee (National Institute of Standards and Technology)
   Metrology II/Oral/Abstract/1993 Annual
5. Two New Probes for a Coordinate Measuring Machine
   J. A. Stone, Jr., L. Carroll, G. Caskey, S. Phillips (National Institute of Standards and Technology),
   R. Resnick, J. Rose (Extrude Hone), and K. Lau (Automated Precision, Inc.)
   Metrology II/Oral/Abstract/1993 Annual
6. Design and Testing of a Laser Ball Bar for Rapid Machine Tool Metrology
   J. C. Ziegert, C. D. Mize (University of Florida)
   Metrology II/Oral/Abstract/1993 Annual

Session V
X-Ray Optics
Wednesday, November 10, 1993, 10:30 am - 12:00 pm
Session Chair: Don Lucca (Oklahoma State University)

1. Replicate Electroformed Wolter II X-Ray Mirrors
   D. E. Engelhaupt (University of Alabama/Huntsville), and R. W. Rood, C. Griffith (NASA Marshall S. F. C.)
   X-Ray Optics/Oral/Abstract/1993 Annual
2. Production of X-Ray Optics by Diamond Turning and Replication Techniques
   S. C. Fawcett (NASA Marshall S. F. C.), and D. E. Engelhaupt (University of Alabama/Huntsville)
   X-Ray Optics/Oral/Abstract/1993 Annual
3. Design and Manufacture of Slit Patterns for Gamma Ray Imaging
   P. V. Pistecky, H. F. van Beek, H. van der Wulp (Delft University of Technology)
   X-Ray Optics/Oral/Abstract/1993 Annual
4. Prospects for X-Ray Optics From Atomic Layer Growth
   J. M. Thorne, J. K. Shurtleff, D. D. Allred, J. D. Phillips (Brigham Young University)
   X-Ray Optics/Oral/Abstract/1993 Annual

Session VI
Ion Beams
Thursday, November 11, 1993, 8:00 - 10:00 am
Session Chair: Robert Wilhelm (StorageTek Corporation)

1. Precision Ion Figuring System Development
   T. W. Drueding, T. G. Bifano (Boston University), and S. C. Fawcett (NASA Marshall S. F. C.)
   Ion Beams/Oral/Abstract/1993 Annual
2. Nanoscale Plasticity in Silica Glass
   J. N. Glosli, D. B. Boercker, A. Tesar, J. Belak
   (Lawrence Livermore National Lab.)
   Ion Beams/Oral/Abstract/1993 Annual
3. Ion Beam Modification of Silicon Carbide for Improved Machinability
   W. K. Kahl, C. M. Egert, R. D. Seals (Oak Ridge National Lab.), and C. J. McHargue (University of Tennessee)
   Ion Beams/Oral/Abstract/1993 Annual
4. Ion Beam Sharpening of Quadrangular and Triangular Pyramidal Diamond Indenters or Probes
   I. Miyamoto, S. Naito, S. Konta (Science University of Tokyo)
   Ion Beams/Oral/Abstract/1993 Annual
5. Development of Optical Fiber Connector Polishing Machines and Ellipsometric Characterization of the Polished Surface Damage
   F. Ohira, S. Matsui, K. Matsunaga, T. Saitoh, Y. Kikuya (NTT Interdisciplinary Research Labs)
   Ion Beams/Oral/Abstract/1993 Annual

Session VII
Machine Design II
Thursday, November 11, 1993, 10:30 am - 12:00 pm
Session Chair: Anthony Gee (Cranfield University)

1. Precision Machining and Measurement Organized by Miniature Robots
   H. Aoyama, A. Sasaki, T. Kubo (Shizuoka University)
   Machine Design II/Oral/Abstract/1993 Annual
2. Application of Advanced Ceramics Materials to Sliding Guideways (Friction and Wear Characteristics Under
   Fluid and Solid Lubrication)
   K. Arai, T. Aoyama (KEIO University)
   Machine Design II/Oral/Abstract/1993 Annual
3. Compensation for Nonlinear Effects in Piezoelectric Actuators
   J. F. Cuttino, T. A. Dow (NC State University)
   Machine Design II/Oral/Abstract/1993 Annual
4. Analysis of Deformation of Air Spindle Due to Centrifugal Force
   K. Yokoyama, T. Hirakura (Niigata University), and T. Moriwaki (Kobe University)
   Machine Design II/Oral/Abstract/1993 Annual

Session VIII
Surfaces
Thursday, November 11, 1993, 1:30 - 3:00 pm
Session Chair: Thomas G. Bifano (Boston University)

1. Measurement of Mechanical Properties of Tympanic Membrane Using Force Sensing Operation Knife and Micro Testing System
   H. Hachiuma, M. Nakao, Y. Hatamura (The University of Tokyo)
   Surfaces/Oral/Abstract/1993 Annual
2. Characterization of Surface Particulate Contamination on Liquid Crystal Optics for Laser Fusion *
   L. D. Lund, A. Rigatti (University of Rochester), and P. Glenn, J. Glenn (Bauer Associates)
   Surfaces/Oral/Abstract/1993 Annual
3. On Replication and 3D Stylus Profilometry Techniques for Measurement of Plateau-honed Cylinder Liner
   Surfaces
   R. Ohlsson, B. Rosén (Chalmers University of Technology)
   Surfaces/Oral/Abstract/1993 Annual
4. Effect of Tool Wear on Surface Finish, Texture, and Tool Forces
   J. R. Tyner, R. O. Scattergood, T. A. Dow, J. C. Russ (NC State University)
   Surfaces/Oral/Abstract/1993 Annual

Session IX
Diamond Turning
Thursday, November 11, 1993, 3:30 - 5:10 pm
Session Chair: Toshimichi Moriwaki (Kobe University)

1. Dynamic Error Correction in Diamond Turning
   J. A. Abler, P. I. Ro (NC State University)
   Diamond Turning/Oral/Abstract/1993 Annual
2. Fabrication of the Attachment Rails Used for Mounting an Array of Eight X-Ray Reflection Gratings
   R. C. Montesanti, P. J. Davis (Lawrence Livermore National Lab.)
   Diamond Turning/Oral/Abstract/1993 Annual
3. Fundamental Study on Mechanics of Elliptical Vibration Cutting
   E. Shamoto, T. Moriwaki (Kobe University)
   Diamond Turning/Oral/Abstract/1993 Annual
4. Optical Finishing of Quartz Crystal by Diamond Turning
   T. Shibata, Y. Takahashi, E. Makino, M. Ikeda (Hokkaido University), A. Chiba (Nihon Dempa Kogyo Co., Ltd.), and M. Tanaka (Nippon Seiko K.K.)
   Diamond Turning/Oral/Abstract/1993 Annual
5. Thermal Energy from Machining Process: A Dominating Factor on Form Accuracy in Ultra- and High-precision Turning
   M. Weck, H. B. Schroeder (Fraunhofer-Institut für Produktionstechnologie)
   Diamond Turning/Oral/Abstract/1993 Annual

Poster Session
Tuesday, November 9, 1993, 10:00 am - 12:00 pm

Fabrication Processes
Grinding

1. Vibration Effect on Cutting Process Used OD-Blade
   K. Ishikawa, H. Suwabe, K. Masuda (Kanazawa Institute of Technology)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
2. Effect of Wheel Characteristics on Ductile Regime Grinding of Brittle Materials
   M. H. Miller, T. A. Dow (NC State University)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
3. An Approach to Improving Cutoff Accuracy in Outer-blade Cutoff Method
   M. Mizuno, T. Iyama, M. Takada (Iwate University)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
4. Ultraprecision Grinding of Inorganic Nonlinear Crystals
   Y. Namba, M. Saeki (Chubu University), and T. Sasaki (Osaka University)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
5. Virtual Modeling of Contour Grinding
   G. E. Storz II, T. A. Dow (NC State University)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
6. The Influences of the Superficial and Structural Changes of Abraded Surface to the Toughening of ZrO2-Y2O3 in Grinding Process
   T. Tanaka, Y. Isono, S. Ueda (Ritsumeikan University)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
7. An Application of Cognitive Science to Making the Knowledge Base for Grinding
   N. Ueda (University of Kumamoto), K. Tsukamoto (Kagoshima National College of Technology), and Y. Mori (Kure-Norton Co.)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
8. ELID Dressing of Grinding Wheels
   M. Walter (Rank Taylor Hobson Inc.)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
9. Brittle/Ductile Surface Grinding
   J. A. Webster (University of Connecticut), and I. D. Marinescu (Polytechnic Institute of Bucharest)
   Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
10. ADF and Neural Network Monitoring of Abnormal Grinding Caused by Loading
    T. Yamamoto, I. Fukumoto (University of Ryukyus)
    Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
11. Microstructural Analyses of Chip Formation in Polycrystalline Ceramics Grinding
    L. Yin, T. Matsuo (Kumamoto University)
    Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
12. Fine Ceramics Grinding Temperature
    S. Yokomizo (Industrial Technology Center of Okayama Prefecture), and T. Kaneeda (Okayama University of Science)
    Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
13. Precision Grinding Regime of Advanced Ceramics
    B. Zhang (University of Connecticut)
    Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
14. New Concepts for Studying the Mechanisms of Grinding
    L. C. Zhang and Y.-W. Mai (The University of Sydney)
    Fabrication Processes/Grinding/Poster/Abstract/1993 Annual
15. A New Truing/Dressing Method for Super-abrasive Wheels
    L. Zhou, K. Syoji, T. Kuriyagawa (Tohoku University)
    Fabrication Processes/Grinding/Poster/Abstract/1993 Annual

Diamond Turning

1. Influence of Microstructure of Work Materials on the Cutting Tool Wear
   S. Ammi (Musashi Institute of Technology)
   Fabrication Processes/Diamond Turning/Poster/Abstract/1993 Annual
2. Performance of High Flux Heat Exchangers Fabricated by Diamond Machining
   C. R. Friedrich (Louisiana Tech University), and S. D. Kang (TamKang University)
   Fabrication Processes/Diamond Turning/Poster/Abstract/1993 Annual
3. Detection of Acoustic Emission Signal From a Rotating Cutting Tool
   H. Kayaba, I. Inasaki (KEIO University)
   Fabrication Processes/Diamond Turning/Poster/Abstract/1993 Annual
4. Application of a Modified Back-propagation Algorithm for Pattern Classification in Turning
   S. Purushothaman, Y. G. Srinivasa (Indian Institute of Technology)
   Fabrication Processes/Diamond Turning/Poster/Abstract/1993 Annual
5. Evaluation of Environmentally Safe Cleaning Agents for Diamond-turned Optics
   L. A. Theye (Los Alamos National Lab.)
   Fabrication Processes/Diamond Turning/Poster/Abstract/1993 Annual
6. The Influence of Crystallographic Orientation on Wear Property of Single Crystal Diamond Cutting Tool
   K. Uegami (Osaka City University)
   Fabrication Processes/Diamond Turning/Poster/Abstract/1993 Annual

Polishing

1. Computer Controlled Precision Optical Polishing on the Diamond Turning Machine
   P. R. Hannah, R. D. Day, D. Hatch (Los Alamos National Lab.)
   Fabrication Processes/Polishing/Poster/Abstract/1993 Annual
2. Figure Correction by Segmented Pressurizing Polishing Machine
   K. Horio, T. Kasai (Saitama University)
   Fabrication Processes/Polishing/Poster/Abstract/1993 Annual
3. Super Finishing Processes Assisted by Magnetic Fields
   B. Zhang , Z. Q. Zhu (University of Connecticut)
   Fabrication Processes/Polishing/Poster/Abstract/1993 Annual

Other Novel Processing

1. Computer Analysis of the Kinematic System of Lapping Machines of Planes
   A. W. Barylski (Politechnika Gdanska)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
2. Comparison of Measured and Predicted Plough Geometries and Forces for a Diamond Pyramidal Indenter
   Ploughing a Gold Surface
   R. D. Day (Los Alamos National Lab), P. Russell (NC State University), and A. Azarkhin (Aluminum Company of America)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
3. The Roles of Knife Sharpness and Cutting Speed in Film Slitting
   T. A. Dow, C. Arcona (NC State University)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
4. A New Method of Finishing the Gear Which is Made of Hardened Steel Material
   T. Fushimi, S. Nagata (Nippon Institute of Technology)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
5. Development of a Deep Hole Boring Tool Guided by Laser: Boring of Workpieces with a Thin Wall and an
   Inclined Prebored Hole
   A. Katsuki, H. Onikura, T. Sajima (Kyushu University), S. Machida (Sumitomo Metal Industries, Ltd.), and K. Oda (Komatsu Co., Ltd.)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
6. Laser Plating of Gold Electrical Contacts
   E. Makino, K. Shida, T. Shibata, M. Ikeda (Hokkaido University), and K. Takahashi, K. Tennichi (Electroplating Engineers of Japan Ltd.)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
7. Oxygen Ion Beam Etching of Diamond (100)
   I. Miyamoto, S. Kiyohara (Science University of Tokyo)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
8. Newly Developed Grinding and Lapping Tools Applying Anodic Spark Deposition of Fine Abrasives
   N. Morita, H. Kobayashi, Y. Yoshida (Chiba University)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
9. High Efficiency Ion Beam Etching for Smooth Surface Formation of Polycrystalline Material
   T. Oda, Y. Yoshida, M. Kobayashi (Mitsubishi Electric Corp.), and I. Miyamoto (Science University of Tokyo)
   Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual
10. High Efficient Electrical Discharge Machining of Titanium Alloy
    Y. Uno, A. Okada (Okayama Univeristy)
    Fabrication Processes/Other Novel Processing/Poster/Abstract/1993 Annual

Metrology
Scanning Metrologies

1. Using a Constant Force Profiler to Investigate the Dynamics of Mechanical Contact at the Stylus
   Probe/Specimen Interface
   L. P. Howard (UNC-Charlotte), and S. T. Smith (University of Warwick)
   Metrology/Scanning Metrologies/Poster/Abstract/1993 Annual
2. Improved Boundary Evaluation of an Indentation by Scanning Tunnelling Microscope Data
   G. Barbato, G. B. Picotto (C.N.R. Torino), and G. Murari, G. Podda (Politecnico di Torino)
   Metrology/Scanning Metrologies/Poster/Abstract/1993 Annual
3. The Determination of Squeeze Film Damping in Capacitance Based Cantilever Force Probes
   Y. Xu, S. T. Smith (University of Warwick)
   Metrology/Scanning Metrologies/Poster/Abstract/1993 Annual

Interferometry

1. Optimization of the Linearity and Accuracy of RST Measurements
   P. J. Caber (WYKO Corporation)
   Metrology/Interferometry/Poster/Abstract/1993 Annual

Novel Metrology Systems

1. The Flatness Measurement of a Medium and Large Scale Machined Surface by Using a Laser Beam Reference Plane
   M. Aketagawa, K. Takada, K. Torii, M. Togashi, Y. Hirano (Nagaoka University of Technology), and Y. Kozakura (Yokogawa Bridge Co., Ltd.)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
2. Automated Diameter and Straightness Measurements of Long, Small Bores
   W. Anderson, K. W. Howell (Hewlett-Packard Co.)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
3. Genetic Search Methods for Assessing Geometric Tolerances
   L. C. R. Carpinetti, D. Chetwynd (University of Warwick)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
4. Shape Measurement of High Compliant Bodies by a Three-dimensional Coordinate Measuring Machine
   S. Esaka, T. Aoyama (KEIO University)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
5. Angle Measurement Based on the Internal Reflection Effect and its Application in the Measurement of
   the Geometric Errors of Machine Tools
   P. S. Huang, J. Ni (The University of Michigan)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
6. Circularity Profile Measurement by Serial Multi-point Method
   H. Kato, T. Hanaoka (Chiba University)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
7. Estimation Method for Alignment Errors of Machine Tools Based on Machined Part Shape Measuring
   T. Kishinami, F. Tanaka (Hokkaido University), and M. Yamada (Hakodate Technical College)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
8. Measurement of Strain Distribution in Diamond Cut Surface Layer Using Micro Grid Applied Electron Beam
   Lithography
   K. Kohno, N. Morita, Y. Yoshida (Chiba University), and S. Kishimoto (National Research Institute for Metals)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
9. Uncertainty of Coordinate Measuring Machine
   V. D. Majstorovic, V. R. Milacic (University of Belgrade)
   Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
10. Noncontact 3-D Profile Sensor - Optical Ring Image Sensor
    T. Miyoshi, Y. Takaya (Osaka University)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
11. Inspection of the Diamond-turned Surfaces Used for Mounting an Array of Eight X-Ray Reflection Gratings
    R. C. Montesanti (Lawrence Livermore National Lab.)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
12. Ultra-Compact Optical Pickup Mechanism
    K. Nakamura, T. Yoshihara, Y. Ishida, K. Nakagawa, K. Kime (Mitsubishi Electric Corp.), and T. Matozaki (Gunna Works)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
13. Development of a Virtual Numerical CMM in Pursuit of Accuracy Assessment for CMMs
    H. Pahk (Pohang Institute for Science & Technology), and M. Burdekin (UMIST, UK)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
14. A CMM Interim Testing Artifact Developed by NIST
    S. D. Phillips, B. Borchardt, G. Caskey, D. Ward, and B. Faust (National Institute of Standards and Technology)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
15. Error Correction Model for a Machining Cell Tombstone
    R. L. Rhorer (Los Alamos National Lab.), and G. Mulholland (NM State University)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
16. Development of a Long Depth of a Focus Optical Microscopy Based on Computer Image Processing
    T. Shiraishi, K. Mitsui (KEIO University)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
17. Gravitational Distortion of Large Optical Flats
    S. K. Smith (Air Force Metrology Standards Lab.)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
18. Error Sources in Serrated Tooth Index Tables
    S. K. Smith (Air Force Metrology Standards Lab.)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
19. Design of a Tiny CMM with Ultralow Thermal Expansion Glass
    S. Ueno (Technical Research Institute of J.S.P.M.I.), and T. Ise, M. Tsuji, K. Shingai (Tokyo Seimitsu Co.)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
20. Laser Rotary Encoders for the Very Large Telescope
    C. P. Wang (Optodyne, Inc.)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
21. Design and Development of an Environmental Monitoring System for the Nanometer Metrology Laboratory
    H. Wei, W. Xu, K. Stout, E. J. Davis (University of Birmingham)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual
22. Uncertainty Analysis of Circle and Arc Measurement Using Discrete Sample Points
    H. Yau (Cummins Engine Company)
    Metrology/Novel Metrology Systems/Poster/Abstract/1993 Annual

Surface Topography

1. Surface Topography Analysis and Representation for Automated Surface Finishing Processes
   C. A. Chen , N. A. Duffie, (University of Wisconsin-Madison)
   Metrology/Surface Topography/Poster/Abstract/1993 Annual
2. High-speed Noncontact Profiler Based on Scanning White Light Interferometry
   L. L. Deck, P. de Groot (Zygo Corporation)
   Metrology/Surface Topography/Poster/Abstract/1993 Annual
3. Evaluation of the Effect of Elastic Radial Deflection Due to Centripetal Acceleration on the Finish and Geometry of Precision Turned and Bored Components
   G. V. Delbrugge, P. H. Cohen, D. J. Madeiros, K. Knott (The Pennsylvania State University)
   Metrology/Surface Topography/Poster/Abstract/1993 Annual
4. Surface Topography Measurement With a Fringe-field Sensor
   R. A. Downs, J. L. Garbini (University of Washington)
   Metrology/Surface Topography/Poster/Abstract/1993 Annual
5. A New Type of Optical Stylus With Optical Skid
   S. Kiyono, M. Yamatani (Tohoku University), and P. Huang (Michigan University)
   Metrology/Surface Topography/Poster/Abstract/1993 Annual
6. Technique and Results of Analysis of Surfaces Orientation Characteristics on Various Scale Levels
   V. A. Kovalev, S. A. Chizhik (Belarus Academy of Sciences)
   Metrology/Surface Topography/Poster/Abstract/1993 Annual
7. Bearing Curve for Rough Surfaces in Quasi-static Contact -- Physical Measurement Method
   A. Polijaniuk, T. Klimczak, J. Kaczmarek (Polish Institute of Fundamental Technological Research)
   Metrology/Surface Topography/Poster/Abstract/1993 Annual

Machine Design

1. Parameters for the Prediction of Rotating Bearing Performance
   P. J. Castle (Rank Taylor Hobson, Inc.)
   Metrology/Machine Design/Poster/Abstract/1993 Annual
2. A Study on the Characteristics of Externally Pressurized Conical Air Bearings with Circumferential Grooves
   D. Han, S. Park, W. Kim (Seoul National University)
   Metrology/Machine Design/Poster/Abstract/1993 Annual
3. Development of a Vibration Gripper
   S. Honda (Science University of Tokyo)
   Metrology/Machine Design/Poster/Abstract/1993 Annual
4. On the Improvement of the Damping Capacity of Machine Tool Structures by Combining with High Damping
   Materials
   T. Kobayashi, T. Matsubayashi, M. Obi (Yamanashi University)
   Metrology/Machine Design/Poster/Abstract/1993 Annual
5. Control of a Rotating Head Micro-tilt Stage for Ultraprecision Single Point Diamond Turning
   H. Mizuno (Nippon Seiko K.K.), and A. E. Gee (Cranfield University)
   Metrology/Machine Design/Poster/Abstract/1993 Annual
6. Vibration Isolation of Precision Equipment
   E. I. Rivin (Wayne State University)
   Metrology/Machine Design/Poster/Abstract/1993 Annual
7. Design of Linear Piezomotor Positioning Apparatus for Precision Manufacturing Applications
   Z. Q. Zhu, B. Zhang, T. D. Howes (University of Connecticut)
   Metrology/Machine Design/Poster/Abstract/1993 Annual

Controls

1. Dynamic Compensation of Measuring Machines
   J. A. Bosch (Giddings & Lewis)
   Metrology/Controls/Poster/Abstract/1993 Annual
2. Open Architecture CNC: The PATS Control System
   R. A. Gore (Los Alamos National Lab.), G. Richter (Moore Special Tool Co.), and P. McNally (Aerotech, Inc.)
   Metrology/Controls/Poster/Abstract/1993 Annual
3. On-line Detection of Tool Failure in Turning Using Acoustic Emission
   H. V. Ravindra, Y. G. Srinivasa, R. Krishnamurthy (Indian Institute of Technology)
   Metrology/Controls/Poster/Abstract/1993 Annual
4. Expert Design System for Choosing the Optimum Size and Shape of Ultrasonic Transducer -- Estimation of the Elastic Dynamic Behaviour by Using the Structural Analysis Technique
   M. Tanaka, T. Hakozaki (Shinshu University)
   Metrology/Controls/Poster/Abstract/1993 Annual
5. Model-based Automatic Generation of Control Sequence from Design Information
   Y. Shimomura (Mita Industrial Co., Ltd.), and T. Sakao, K. Ohmichi, T. Widmer, Y. Umeda, T. Tomiyama, H. Yoshikawa (The University of Tokyo)
   Metrology/Controls/Poster/Abstract/1993 Annual
6. Accuracy Improvement of Machine Tool by Workpiece-referred Control (2nd Report)
   Y. Uda, T. Kohno, T. Yazawa (Tokyo Metropolitan Institute of Technology)
   Metrology/Controls/Poster/Abstract/1993 Annual

FEM and Other Modeling

1. An Initialization Procedure for Calibration with a Three Dimensional Tracking System
   A. J. Abackerly, B. DiGiacomo (Universidade de Sao Paulo)
   Metrology/FEM and Other Modeling/Poster/Abstract/1993 Annual
2. A Mathematical Model for On-line Measurement of Microchannel Geometry in Diamond-bit-machining
   Technique
   B. C. Rao, R. X. Gao, C. R. Friedrich, R. O. Warrington (Louisiana Tech University)
   Metrology/FEM and Other Modeling/Poster/Abstract/1993 Annual
3. The Analysis of Molecular Scale Roughness Effect on Adhesion and Friction of Solids
   S. A. Chizhik, V. V. Gorbunov, N. K. Myshkin (Belarus Academy of Science)
   Metrology/FEM and Other Modeling/Poster/Abstract/1993 Annual
4. Simulation of Vibration in a Large Scale Electron Microscope
   S. Kato (Nippon Institute of Technology), and M. Kanetomo, J. Endo, K. Sato (Hitachi Ltd.)
   Metrology/FEM and Other Modeling/Poster/Abstract/1993 Annual
5. Finite Element Simulation of Three-Dimensional Continuous Chip Formation Processes
   K. Maekawa (Ibaraki University), T. Kitagawa (Kitami Institute of Technology), T. Shirakashi (Tokyo Institute of Technology), and T. H. C. Childs (University of Leeds)
   Metrology/FEM and Other Modeling/Poster/Abstract/1993 Annual
6. Deformation and Stress Analysis of Gearing
   J. Mandak (MTA Brno)
   Metrology/FEM and Other Modeling/Poster/Abstract/1993 Annual
7. Molecular Dynamics Simulation of Nanometer-level Cutting
   T. Uchida, T. Yokotsuka, Y. Kawauchi, K. Kawata (Matsushita Research Institute Tokyo, Inc.), and
   M. Doyama (The Nishi-Tokyo University)
   Metrology/FEM and Other Modeling/Poster/Abstract/1993 Annual

Manufacturing

1. Development of a Rapid Manufacturing System Using Real-Time Machining State Detection
   M. Mitsuishi, S. Warisawa, T. Ohta, T. Nagao (The University of Tokyo)
   Metrology/Manufacturing/Poster/Abstract/1993 Annual
2. Object-oriented Rescheduling System in Autonomous Distributed Manufacturing System
   T. Moriwaki, N. Sugimura (Kobe University)
   Metrology/Manufacturing/Poster/Abstract/1993 Annual
3. Survey and Improvement on the Productivity in Turning Operations Done in Manufacturing Industries by Using NC Program Simulator
   K. Shirase, M. Hirao, T. Yasui (Kanazawa University), and H. Kawabata, Y. Fujimura (Kanazawa Institute of Technology)
   Metrology/Manufacturing/Poster/Abstract/1993 Annual
4. Capacitive Position Transducers: Possibilities in Modern Machining and Manufacturing
   J. W. Spronck, M. H. W. Bonse, H. F. van Beek (Delft University of Technology)
   Metrology/Manufacturing/Poster/Abstract/1993 Annual