2008 Annual Meeting Poster Presentations

2008 Poster Presentations

Table of Contents

Tuesday, October 21, 2008, 3:30 pm - 4:30 pm
Wednesday, October 22, 2008, 3:50 pm - 5:00 pm
Session Chair: Bradley H. Jared (Sandia National Laboratories) and Eric S. Buice (Delft University of Technology)

Applications of Precision Engineering in Manufacturing

Model for Cutting Edge Tools in Order to Evaluate Plastic Deformation and Friction Forces at High Speed Machining
Amarandei, D.; Ionescu, R.; Petrariu, V. (Universitatea Stefan cel Mare)
Three-dimensional Internal Information Acquisition System Based on Consecutive Precision Machining and Cross-sectional Observation - Development of the system and its Applications -
Furushiro, Naomichi; The University of Tokyo and RIKEN; Yokota, Hideo; RIKEN; Fujisaki, Kazuhiro;Hokkaido University and RIKEN; Yamagata, Yutaka; Kanagawa Academy of Sci. & Technol.; Kokubo,Mitsunori; Toshiba Machine Co., Ltd.; Himeno, Ryutaro; RIKEN; Makinouchi, Akitake; RIKEN; Higuchi, Toshiro; University of Tokyo
Effects of Chucking Methods in Turning on Surface Topography and Roundness Error of Carbon Steel Machined Components
Hadi, Y. A.; Varghese, S.; Ibrahim, A. (Yanbu Industrial College)
Fabrication of a New Three Dimensional Position Surveying System for the Underground PipesUsing Four Rotary Encoders
Hamano, T.; Kato, S. (Nippon Institute of Technology); and Ono, M. (Tokyo Metropolitan College of Industrial Technology)
Synthesis of Semi-solid Casting Processes for Optimal Fabrication of Thin-walled Parts
Hong, S.-H.; Lee, K.-J.; Hanyang University; Chung, S.-C. (Hanyang University)
Optical Closed Loop Control for the Precision Grinding of Micro-EDM Electrodes
Howe, M.; Bamberg, E. (University of Utah)
The Lubricant Applying Effect in Ti Alloy Cutting
Kaneeda, T. (Okayama University of Science); and Anthony, L. (Waseda University)
Storing Period Effects on Wear Properties in UHMWPE Inserts for Artificial Joints
Kaneeda, T.; Miyata, Y. (Okayama University of Science); Anthony, L. (Waseda University); and
Fujiwara, K.; Doi, K.; Kuramoto, K. (Nakashima Co. Ltd.)
Deviated-Deep-Hole Boring for Avoiding an Existing Reinforcing Member
Katsuki, A.; Onikura, H. (Kyushu University); and Horita, K.; Horiuchi, T. (Japan Fine Tech Co., LTD)
Experimental Validation of Optimum Parameters of Heating Tool Iin Flip Chip Bonding
Kweon, S.-H.; Yang, S.-H. (Kyungpook National University)
Generating Method of Micro Groves by Micro EDM
Lee, H.-S.; Mikami, H.; Yamada, T. (Nihon University)
Tool Path Generation for the 3D Engraving System from 2D Images
Lee, W.-S.; Chung, S.-C. (Hanyang University)
Fabrication of Fused Silica Optical Quality Pin Chuck Using Wet Etching Process
Lemmons, T. D.; Ozturk, O.; Hocken, R. J. (University of North Carolina at Charlotte); and Fesperman Jr., R. R. (Moore Tool Company, Inc.)
The Zeeko Corrective Polishing Techniques as Applied to the Finishing of Semiconductor Thin Films
Morton, R. K. (Zeeko Ltd.)
Minimum Quantity Lubrication Turning Using Tools with oil Holes
Ozawa, M.; Hosokawa, A.; Tanaka, R.; Furumoto, T.; Ueda, T. (Kanazawa University)
Surface Texture Identification Using Optical Methods
Saad, M. E.-S.; Raja, J. (University of North Carolina at Charlotte) and Damir, M. N. E. D.; Younes, M. A. (University of Alexandria)
A Flexure-based Mechanism for Precision Angular Alignment at Large Loads
Shilpiekandula, V.; Youcef-Toumi, K. (Massachusetts Institute of Technology
(Abstract not available by request of the author)
Improvement of Chip Controllability of Carbon Steel in Turning by Laser Heat Treatment
Tanaka, R.; Hosokawa, A.; Ueda, T.; Furumoto, T.; Kusano, T.; Lin, Y. (Kanazawa University)
Intelligent-speed–increasing Spindle Using Traction Drive
Yamanaka, M.; Sugimoto, K.; Inoue, K. (Tohoku University)

Control of Precision Machines and Processes

High Resolution, High Speed Real-Time Digital Control System For Precision Applications
Gawlik, A.; MacKenzie, R. Ia.; Otten, D.; Trumper, D. L. (Massachusetts Institute of Technology)
Integrated Tuning of a Robust Controller for Linear Servomechanisms
Hong, Seung-Hwan; Hanyang University; Chung Ph. D., Sung-Chong; Hanyang University
Piezo driven XY stage with nano-manipulators for SEM operation
Kanegae, S.; Chiba, H.; Irie, Y.; Aoyama, H. (University of Electro-Communications); and Iwata, F. (Shizuoka University)
Novel Switching Control of the Ball-Screw Driven Stage for Nano Positioning
Kim, G.; Cho, S.-G.; Kim, W. S.; Lee, S.-K. (Gwangju Institute of Science and Technology (GIST))
Development of Intelligent Encoder
Kitawaki, J.; Kanamori, C. (The University of Electro-Communications)
Optimized Production of Complex Shaped Optical Components via Presicion Glass Molding
Klocke, F.; Dambon, O.; Sarikaya, H.; Wang, F. (Fraunhofer Institut für Produktionstechnologie -- IPT)
Detection of Micro Tool Wear in Diamond Turning of Large Area Micro-lens Array by Inprocess Cutting Force Measurement
Noh, Y. J.; Arai, Y.; Gao, W. (Tohoku University)
Precision Motion Control and Optimization
Ruben, S.; Tsao, T.-C. (University of California - Los Angeles)
Characteristics of PVAJT Trajectory Generator and its Implementation
Shin, D. (Kumoh National University of Technology)
Control Strategies For A Dynamic Positioning Machine At Nanometer Level
Yang, R. H.; Smith, S. T. (University of North Carolina at Charlotte); Liu, X. P.; Wang, W. L.
(University of Warwick); and Buice, E. S. (Delft University of Technology)

Design and Fabrication of Structured Surfaces

Improvement on Adhesive Strength of Ti-doped DLC Films by Heat Treatment in Vacuum
Kohzaki, M. (Tokai University)
Predictive Error Compensation for Precision Manufacturing of Microstructured Surfaces
Luo, X. (Heriot-Watt University)
Investigations on Laser Interaction in Annealing if Amorphous Silicon Films by Pulsed Nd: Yag Laser
Palani, A. L.; Vasa, N. J.; Singaperumal, M. (Indian Institute of Technology Madras)

Design of Precision Machines and Instruments

Selection of Precision Actuators by Novel Function-structure-correspondencies
Erbe, T.; Król, J.; Ströhla, T.; Theska, R. (Technical University of Ilmenau)
Mineral Casting as Material for Machine Base-Frames of Precision Machines
Erbe, T.; Theska, R.; Król, J. (Technical University of Ilmenau)
Design, Analysis and Fabrication of a Single Axis Microstage
Esteki, H. (Amirkabir University of Technology); and Shahidi, A.; Sarkar, S. (Research Center for Science and Technology in Medicine)
Precision Machine Design: Micro-positioning for Precise Ink Jet Delivery
Gatica, A. W.; Parks, P. (M3 Design)
Application of Planar Air Bearing Concept for Precision Machine Tool Design
Gorniak, J.; Erkorkmaz, K. (University of Waterloo)
Fabrication of a Green Caterpillar Type In-pipe Mobile Inspection Microrobot Driven by Pneumatic and Vacuum Pressure
Kato, S.; Goto, Y. (Nippon Institute of Technology); and Ono, M. (Tokyo Metropolitan College of Industrial Technology)
Observing the Behavior of AFM Cantilevers During Quasi-static Loading
Kumanchik, L.; Schmitz, T. L. (University of Florida)
A Compound and Compact Actuator for the Molecular Measuring Machine
Li, J.; Shen, Y.-L. (The George Washington University); Jeong, J. (Korea University); Scire, F. E.; Kramar, J. A. (National Institute of Standards and Technology)
Fabrication of a Snake Type In-Pipe Mobile Robot Passable T-junction
Ono, M.; Ito, S. (Tokyo Metropolitan College of Technology); Goto, Y.; Hamano, T.; Kato, S. (Nippon Institute of Technology)
Updating the Sub-Atomic Measuring Machine
Overcash, J. L.; Hocken, R. J. (University of North Carolina at Charlotte)
Multi-Scale Alignment Positioning System for NIL
Ozturk, O.; Hocken, R. J. (University of North Carolina at Charlotte); and Fesperman, R. R. (Moore Tool Company, Inc.)
Pneumatic Servo Bearing Actuator for Ultraprecise Positioning: Part 2 (New Approach for Ultra-precision Motion Control)
Sasaki, K; (Pneumatic Servo Controls, Ltd.); Hirayama, T. (Doshisha University); and Yabe, H. (Osaka Electro-communication University)
Design of MEMS for Optical Beam Manipulation
Soemers, H. M. J. R. (Philips Applied Technologies)
Efficient Evaluation of Early Machine Tool Concepts in the Frequency Domain Including Control Issues
Weikert, S.; Jäger, C.; Bossoni, S.; Wegener, K. (Swiss Federal Institute of Technology (ETHZ))
Design of Fast Long Range Actuator - FLORA II
Zdanowicz, E. M.; Eischen, J.; Dow, T. A. (North Carolina State University)
Design of A Novel Piezoelectric Inchworm Actuator
Zhang, Z.; Hu, H. (Harbin Institute of Technology)

Dimensional Metrology

Microscale Metrology Using Standing Wave Probes
Bauza, M. B.; Woody, S. C. (InsituTec, Inc.); Smith, S. T. (University of North Carolina at Charlotte); and Seugling, R. M.; Darnell, I.; Florando, J. (Lawrence Livermore National Laboratory)
Calibration of Lens Geometrical Distortions for High-Precision Video-Based Dimensional Inspection Systems Equipped with Telecentric Lenses
Ding, Y. (Micro Encoder, Inc.)
An Approach to Assess the Geometric Imperfections of Micro-Scale Cutting Tools
Filiz, S.; Ozdoganlar, O. B. (Carnegie Mellon University)
Accuracy, Repeatability and Reproducibility of a 2D Speckle Displacement Sensor with Various Measurement Surfaces
Harsila, S. A.; Jones, B. K. (Micro Encoder, Inc.)
Comparison of fringe pattern obtained by scanning polished metal cylinders and sharp-edge objects with laser beam
Jablonski, R. T. (Warsaw University of Technology)
Development of the Primary Nanoparticle Measurement Standard by the Electro-Gravitational Aerosol Balance
Lin, C.-M.; Chen, C.-J.; Pan, S.-P.; Weng, H.-F.; Yu, T.-C. (Center for Measurement Standards/Industrial Technology Research Institute)
Development of a Measuring System for a Micro Hole -Using an Optical Fiber Probe-
Murakami, H. (Fukuoka Industrial Technology Center); and Katsuki, A.; Onikura, H.; Sajima, T. (Kyushu University)
Precision Measurement of Motion Accuracy for Development of Micro Measurement Center
Ogura, I.; Okazaki, Y. (National Institute of Advanced Industrial Science and Technology)
Profile Measurement of Micro-Aspheric Surface by a Small-Scale Measuring Instrument
Shibuya, A.; Yoshikawa, Y.; Arai, Y.; Gao, W. (Tohoku University)
Development of a Compact, Nanometer-Resolution, Interferometric Fiber-Optic Encoder
Tobiason, J. D.; Zwilling, A. M. (Micro Encoder, Inc.)
Subnanometer Displacement Measurement using Common-path Grating Interferometry
Wu, C.-C.; Hsu, C.-C.; Chen, C.-J. (Center for Measurement Standards/Industrial Technology Research Institute); and Lee, J.-Y. (National Central University)

Grinding, Polishing, and Lapping

Precision Grinding of Silicon
Alao, A.-R.; Konneh, M. (International Islamic University)
Dicing Process for the Device Separation of a Slider with an Integrated Microactuator (SLIM)
Cvetkovic, S.; Saalfeld, H.; Gatzen, H. H. (University of Hannover)
Ultrasonic Assisted Grinding of Brittle Materials – Surface Topography and Process Forces
Denkena, B.; Boehnke, D.; Hahmann, D. (Leibniz Universität Hannover)
Nano-Indentation and Scratch Tests on Optical Fiber Material to Determine Ductile Mode Critical Depth of Cut Gharbia, Y. A. (Dhofar Univeristy); and Katupitiya, J. (University of New South Wales)
Polishing-Grinding – An Innovation for Manufacturing of High Precision Optics
Grüntzig, A.; Klocke, F.; Völker, C.; Hollstegge, D.; Dambon, O.; Herben, M.; Bulla, B.; Czarlay, D.; Riegel, J. (Fraunhofer Institute for Production Technology – IPT)
Mechanochemical Diamond Stone Containing BaSO4 Abrasive
Higuchi, M.; Furushiro, N.; Yamaguchi, T.; Sugimoto, T. (Kansai University); Matsumori, N.; Ogura, H. (Mizuho Co.,Ltd.); and Shimada, S. (Osaka Electro-Communication University)
Achievement of High Flatness of Large Diameter Silicon Wafer in Double-Sided Polishing --Optimization of Polishing Conditions Based on Kinematical Analysis --
Hirose, K.; Enomoto, T. (Osaka University)
Optimization of Quality of the Cylindrical Superfinished Surfaces
Ionescu, R.; Amarandei, D. (Universitatea Stefan cel Mare)
Modeling and Simulation of Grinding Processes with Porous Grinding Wheel -- Part II: Single Grain Model and Process Simulation
Jiang, F.; Li, X.; Rong, Y. K.; Zhou, J. (Worcester Polytechnic Institute); and Li, J. (Shandong
University)
Corrective Polishing of Complex Ceramics Geometries
Klocke, F.; Brecher, C.; Dambon, O.; Wenzel, C.; Zunke, R.; Tuecks, R. (Fraunhofer Institute for Production Technology -- IPT)
Characterisation on the Surface Quality and Removal of Wafer with Variable Machining Conditions in the Wafer Polishing System
Lee, J. T.; Won, J. K.; Lee, E. S. (INHA University)
Modeling and Simulation of Grinding Processes with Porous Grinding Wheel -- Part I: Fabrication Process Analysis Based 3D Grinding Wheel Modeling
Li, X.; Jiang, F.; Rong, Y. K. (Worcester Polytechnic Institute)
Influence of Polisher Surface Structure on Ultra-Smoothness Polishing Characteristic of Magnetic Disk Substrate
Takagi, M.; Yasui, H.; Kusaba, K.; Fukakusa, N. (Kumamoto University)
Development of Nano-precision Synergistic Finishing Process Integrated ELID-grinding and MRF
Ohmori , H.; Uehara, Y. (The Institute of Physical and Chemical Research); Yin, S. (Hunan
University); and Ishida, S. (The Nexsys Corporation)
The Development of a Next Generation Water-Based Grinding Fluid
Salmon, S. C. (Next Generation Technology Group, Inc.); Hug, P. (Recombinant Innovation, LLC); and Nelson, A. (ARN Engineering )
Characterisation of Pad Materials in Abrasive Profile Polishing
Schulte, H.; Riemer, O.; Brinksmeier, E. (Bremen University)
Nano-Finishing by Pulsating Flexible Magnetic Abrasive Brush (P-FMAB)
Singh, D. K. (Madan Mohan Malviya Engineering College); and Jain, V. Ku.; Raghuram, V. (Indian Institute of Technology, Kanpur)
A Metrological Study on Hardened Steel Surface Finishing Using a Diamond Burnishing Tool
Tanaka, H.; Yanagi, K. (Nagaoka University of Technology); and Tabuto, H. (Fuji Heavy Industries Ltd.)
Continuous Phase Plate Polishing Using Magnetorheological Finishing
Tricard, M.; Dumas, P. R. (QED Technologies, Inc.); and Menapace, Joe (Lawrence Livermore National Laboratories)
Tagging Abrasive Slurries with Quantum Dots as a Means to Assess Subsurface Damage
Williams, W. B.; Mullany, B. A. (University of North Carolina at Charlotte)
Contact Stiffness Of Vitrified And Resinoid Grinding Wheels Taking Into Account Of The Dressing Condition
Yamada, T.; Lee, H.-S.; Takemoto, K. (Nihon University)
Influence of Normal Feed on Surface Roughness in Newly Developed Ultra-Smoothness Grinding Method
Yasui, H.; Sakamoto, R.; Tanaka, Y.; Yoshimura, T. (Kumamoto University)
An Investigation on In-Process Dressing Method Developed for New Ultra-Smoothness Grinding Method Using Super Abrasive Wheel
Yasui, H.; Tanaka, Y.; Sakamoto, R.; Matsuda, K. ( Kumamoto University)

Machine Tool Metrology

An Oscillatory Touch-Probe System for Micromachining in Miniature Machine-Tool Platforms
Anandan, K. P.; Long, G. A.; Ozdoganlar, O. B. (Carnegie Mellon University)
Integration of On-machine Probing and Machine Tool Metrology
Cummings, M. A. (TechSolve)
Spindle Metrology with a CCD Camera
Deakyne, T. R.; Marsh, E. R. (The Pennsylvania State University)
Measurement and Compensation of a 4 Axis Ultra Precision Machine Tools for Generating Micro Patterns on the Large Surfaces
Hwang, J.; Song, Y.-C.; Song, C. K.; Park, C. H. (Korea Institute of Machinery & Materials (KIMM))
Detection of Orientation-dependent, Single-crystal Diamond Tool Edge Wear Using Cutting Force Sensors, While Spin-turning Silicon
Sommer, E. J.; Deakyne, T. R.; Marsh, E. R. (The Pennsylvania State University)

Measurement Uncertainty

Thermistor Bridge Performance in the 10^-4 to 1 Hz Range and its Applications in Gravitational Wave Detection Projects
Clark, D. E.; Higuchi, S.; Lantz, B. T.; DeBra, D. B. (Stanford University)
Thermistor Bridge Performance in the 10^-4 to 1 Hz Range and its Applications in Gravitational Wave Detection Projects
Higuchi, S.; Clark, D. E.; Lantz, B. T.; DeBra, D. B. (Stanford University)
Test Uncertainty & Test Uncertainty Ratio (TUR)
Khanam, S. A.; Morse, E. P. (University of North Carolina at Charlotte)
Characterization of a Thermal Contact Interface with Conductive Material
Kim, J.-K.; Bajracharya, I.; Gwangju Institute of Science and Technology (GIST); Lee, S.-K. (Gwangju
Institute of Science and Technology (GIST)); and Nakayama, W. (Therm Tech International)
Updating Milling Stability Beliefs Using Decision Analysis Techniques And Limited Experimental Information
Zapata Ramos, R. E.; Schmitz, T. L. (University of Florida); and Abbas, A. E. (Univerisity of Illinois,
Urbana-Champagne)

Micro-Electromechanical Devices

The Design and Optimization of Cascaded Chevron Flexures and Actuators for Precision Motion Guidance
Chen, S.-C. (Massachusetts General Hospital); and Culpepper, M. L. (Massachusetts Institute of Technology)
Design and Fabrication of a Microrobot Movable in Human’s Large Intestine Model
Kato, S.; Goto, Y.; Hamano, T. (Nippon Institute of Technology); and Ono, M. (Tokyo Metropolitan College of Industrial Technology)
Comparison of Anchor Designs for MEMS Resonant Mass Sensors
Li, C.; Miller, M. H. (Michigan Technological University)
Investigation of Air Damping and Q in Resonant Mass Sensors
Li, C.; Miller, M. H. (Michigan Technological University)
Evaluation of Harmonic Distortions in Precision MEMS Inertial Sensors
Spiewak, S. A. (University of Calgary); Hauer, G. (ARAM Systems, Ltd.); and Ludwick, S. J. (Aerotech, Inc.)

Nanotechnology

Design and Implementation of a Nano-Machining System with Integrated Metrology Capability
Gozen, B. A.; Ozdoganlar, O. B. (Carnegie Mellon University)
Nanometer-scale Ultrasonic Cutter Using an Atomic Force Microscope Controlled by a Haptic Device
Iwata, Futoshi (Shizuoka University); Ohara, Kouhei; Kawanishi, Shinsuke; Aoyama, Hisayuki; (University of Electro-Communications); Ushiki, Tatsuo
Nanostructure Fabrication Method by UV-Nanoimprint Process and its Optical Efficiency Assessment for OLED
Shim, J. Y.; Jeong, J.-H.; Lee, E.-S.; Song, C. K.; Park, C. H. (Korea Institute of Machinery & Materials); and Jeon, S.-H.; Kim, J.-J. (Seoul National University)
The Discrete Polystyrene-Gold Core-Shell Nanoparticles Array and their Surface Plasmonic Properties
Zettsu, N.; Uchida, S.; Yamamura, K. (Osaka University)

Novel Equipment and Processes

Experimental Study of Micro Ultrasonic Machining Process
Cheruku, S.; Sundaram, M. M.; Rajurkar, K. P. (University of Nebraska-Lincoln)
Combination Machining of Wire-Sawing with Electro-Chemical Discharge Machining
Furutani, K.; Tomoto, M. (Toyota Technological Institute)
New Approaches of Bevel Shape Generation for Quartz Crystal
Horio, K.; Kaneko, J.; Yamazaki, T. (Saitama University)
Local Synthesis of Cabon Nanotubes by Electron Beam-heating Chemical Vapor Deposition
Kaito, H.; Nagato, K.; Tsuchiya, K.; Hamaguchi, T.; Nakao, M. (The University of Tokyo); and Kasuya, K. (Hitachi, Ltd.)
Development of a Precise and Quick Response Pneumatic Pressure Regulator and its Application to Pneumatic Vibration Isolator
Kato, T. (Tokyo Metropolitan College of Industrial Technology); Tadano, K.; Kawashima, K.; Kagawa, T. (Tokyo Institute of Technology); and Yamamoto, N. (Tokyo Meter Corporation)
Multi-Sectional Synthesis of Tungsten Oxide Nanowires Using Micropatterned Layer for Field-Emission Displays
Moritani, H.; Nagato, K.; Kojima, Y.; Hamaguchi, T.; Nakao, M. (The University of Tokyo); and Kasuya, K. (Hitachi, Ltd.)
Micro and Nano Assembly Tools Utilizing Standing Wave Technology
Nowakowski, B. K.; Smith, S. T. (University of North Carolina at Charlotte); Woody, S. C.; Bauza, M. B. (InsituTec, Inc.); Seugling, R. M.; Darnell, I.; Florando, J. (Lawrence Livermore National Laboratoy)
Development of Multi-wire EDM Slicing Method for Silocon Ingot
Okamoto, Y.; Uno, Y.; Okada, A.; Ohshita, S. (Okayama University); Hirano, T. (Toyo Advanced Technologies Corporation); and Takata, S. (Makino Milling Machine Corporation)
A Cutting Tool with Nano/Micro-textured Surface for High Anti-adhesive Effects
Sugihara, T.; Enomoto, T. (Osaka University)
Improvement of Thickness Uniformity of Silicon and SOI Wafer by Numerically Controlled Local Wet Etching
Yamamura, K.; Mitani, T.; Zettsu, N. (Osaka University)

Optics and Interferometry

Manufacture and Measurement of a Precision Milli- and Micro-scale Germanium Optics Array for Novel Thermal Imaging Systems
Davies, M. A.; Suleski, T. J.; Barkman, M. L. (University of North Carolina at Charlotte); and Dutterer, B. S. (National Institute of Standards and Technology)
Field-of-View Distortion Calibration and Compensation for Ultra-high Accuracy Video-Based Metrology Systems
Ding, Y. (Micro Encoder, Inc.)
F-Theta Fresnel Lenses
Garrard, K. P.; Sohn, A.; Dow, T. A. (North Carolina State University)
Manufacture of Large Optics: Materials and Processes
Gee, A. E.; Brooks, D. (University College, London)
Flexure Based Mechanics for Improved Lens System Optimization
Hanford, K. (Corning Tropel Corporation)
A Two-degree-of-freedom Linear Encoder for Position and Straightness Measurement of a Linear Stage
Kimura, A.; Arai, Y.; Gao, W. (Tohoku University)
Development of a Sensitive 3-Axis Angle Sensor Based on Laser Autocollimation
Saito, Yusuke; Tohoku University; Gao, Wei; Tohoku University; Arai, Yoshikazu; Tohoku University
Design, Fabrication and Testing of Kinoform Lenses
Sohn, A.; Garrard, K. P.; Dow, T. A. (North Carolina State University)
Frequency Stabilized Laser System for Metrology Applications and Precision Instrumentation
Stroup, C. G.; Overcash, J. L.; Hocken, R. J. (University of North Carolina at Charlotte)

Precision Fabrication and Assembly

Automated Part Centering through Impulse Actuation
Furst, S. J.; Dow, T. A. (North Carolina State University)
Fabrication of Multi-Element Micro Optics by Precision Hot Embossing
Gill, D. D.; Jared, B. H; (Sandia National Laboratories)
The Study of Aspherical Micro Lens Array Fabrication by Using Fast Tool Servo
Hsu, W.-Y.; Kuo, C.-H.; Cheng, Y.-J.; Lin, W.-L. (Instrument TechnChiangology Research Center, National Applied Research Laboratories)
Experimental Study on Microassembly by Using Liquid Surface Tension
Kato, Y.; Mizuno, T.; Takagi, H.; Ishino, Y.; Takasaki, M. (Saitama University)
Design of the Virtual Manufacturing System for Precision Fabrication
Song, I.-H.; Chung, S.-C. (Hanyang University)

Scanning Probe Microscopy

High-scan Rate Positioner for Scanned Probe Microscopy
MacKenzie, R. I.; Gawlik, A.; Trumper, D. L. (Massachusetts Institute of Technology)
Performance Improvements in the Measurements of a Large Range Scanning Probe Microscope
Rachakonda, P. K.; Kramar, J. A. (National Institute of Standards and Technology)

Surface Metrology

Characterization of Microstructure Freeform Surfaces Using a Pattern Matching Analysis
Cheung, C.-F.; Kong, L. B.; Lee, W.-B.; To, S.; Kwok, T. C. (The Hong Kong Polytechnic University)
Analysis of Surface Accuracy by End Milling
Ikeda, N.; Kobayashi, Y.; Shirai, K. (Nihon University); and Tozawa, K. (Nissan Motor Co., Ltd.)
Prototype of Surface Material Measures for Calibration Of 2D and 3D Surface Texture Measuring Instruments
Nemoto, K.; Yanagi, K.; Aketagawa, M.; Sakurai, T. (Nagaoka University of Technology); Yoshida, I.
(Japan Science and Technology Agency); and Uchidate, M. (Iwate University)
Modelling of Cylinder Surface Topography
Pawlus, P. (Rzeszów University of Technology); and Reizer, R. (University of Rzeszow)
Optimizing Gaussian Filter Long Wavelength Cutoff for 3D Ballistics Topography Signature Correlations
Song, J.-F.; Ma, L.; Silver, R. M. (National Institute of Standards and Technology
Study of an Interpolation of Flatness Data Measured by Successive Differential Laser Auto-Collimation
Uda, Y.; Shimada, S. (Osaka Electro-Communication University); and Go, Y. (Nagase Integrex Co.
Ltd.)

Ultraprecision Machining

Ultra Fine Tool Servo System
Gan, S. W.; Rahman, M. (National University of SingapoMre); and Lim, H. S. (Mikrotools Pte. Ltd.)
Residual Stresses Probed In Resudual Stresses Probed In Diamond Turned Single Crystal Silicon Probed By Raman Spectroscopy
Jasinevicius, R. G. (Universidade de São Paulo); and Pizani, P. S. (UFSCAR)
Machining Technology of Micro Waved V-Pattern using Shaping Process
Je, T.-J.; Choi, D.-S.; Lee, K.-W.; Park, K.-T.; Whang, K. H. (Korea Institute of Machinery & Materials
(KIMM))
Factors Affecting Changes in Removal Rate of Elastic Emission Machining
Kanaoka, M.; Takino, H.; Nomura, K. (Nikon Corporation); and Mori, Y.; Mimura, H.; Yamauchi, K.
(Osaka University)
Ultra Precision Machine-Integrated Measurement of Spheres and Aspheres with a Twyman-Green Interferometer
Kurz, M. (Technical University Berlin); Bosse, M.; Neubert, R.; Bluemel, T. (FISBA OPTIK GmbH);
Oberschmidt, Dirk; Fraunhofer IPK; Uhlmann, Eckart; Fraunhofer IPK
Analysis of the Optical Effects of Diamond Machined Surface
Li, L.; Collins, S. A.; Yi, A. Y. (The Ohio State University)
Ultra Precision Machining Disturbance Frequency Extraction from Finished Surface Metrology
Meyer, P.; Veldhuis, S. C.; Elbestawi, M. A. (McMaster University)
Development of CAPP/CAM System for Ultraprecision Micromachining
Oba, T.; Ishida, T.; Takeuchi, Y. (Osaka University)
Historical Note on Dynamic Strain Measurements
Rhorer, R. L. (National Institute of Standards and Technology)
Application of Magnetorheological (MR) Jet in Precision Finishing
Shorey, A. B.; Kordonski, W. I.; Tracey, J. (QED Technologies Inc.)
Surface Generation In Ultra Precision Single Point Diamond Turning Of Aluminum
Tauhiduzzaman, M.; Veldhuis, S. C. (McMaster University)
Machining of Glass Lens Mold with Minute Structures by Grinding and Cutting
Yamamoto, S.; Fujii, T.; Ishida, T.; Takeuchi, Y. (Osaka University); and Hirano, M.; Shibukawa, T.
(JTEKT Corporation)
Influence of Cutting Speed on Ultra-precision Cutting Characteristics of Stainless Steel with Coated-cemented-carbide Tool
Yasui, H.; Kawabayashi, T.; Toyama, A.; Hayashi, H.; Shinozaki, A. (Kumamoto University)
Extension of Ultra Precision Machining to Titanium and its Alloys
Zareena, A. G. R.; Veldhuis, S. C. (McMaster University)
Studying On The Influence Of Cutting Edge Sharpness On Minimum Chip Thickness And Material Flow In Micromachining
Zhou, J.; Rong, Y. K.;(Worcester Polytechnic Institute); and Li, J.; Sun, J. (Shandong University)

American Society for Precision Engineering
P.O. Box 10826, Raleigh, NC 27605-0826 USA, (919) 839-8444, (919) 839-8039 Fax
webmaster@aspe.net
© 1999-2001 American Society for Precision Engineering. All rights reserved.